Mechanical Engineering (II Shift)

Head of the Department: Dr. Ramachandra C G

Publications – After Joining SIT
National Conference – Papers Presented

  • 1
    Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002.
  • 2
    Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002.
  • 3
    Ramachandra C G and Rishi J P, “Recent Trends in Condition Monitoring of Machinery”, AICTE sponsored National Conference, NMAMIT Nitte, 21st and 22nd March 2002.

Publications – After Joining SIT
International Journal – Papers Published

  • 1
    C.G. Ramachandra and T.R.Srinivas, “Maintenance Management Information System Used in Maintaining the Maintenance Activities of a Board Manufacturing Industry”, International Journal of Industrial Engineering and Technology (IJIET) ISSN 0974-3146,International Research Publication House, Volume 3, Number 2, July-December 2011, Page No. 163-172.
  • 2
    Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Small Scale and Medium to Large Scale Industries”, Advances in Engineering Science and Management, ISBN: 978-1-4673-0213-5,IEEE Explorer – March 2012, Page No. 31-35.
  • 3
    Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System (MIS) in Small Scale Industries”, International Journal of Research in Commerce & Management (IJRCM) ISSN 2231-5756, Volume 2, Issue 3, March-2012, Page No. 78-82.
  • 4
    Ramachandra C G and T.R.Srinivas, “Study On Usage Of Management Information System (MIS) In Medium Scale Industries”, International Journal of Business Research and Manufacturing Management(IJBRMM),ISSN 2231-5439 Business Management Research (BMR), Volume 2, Number 1, April-2012, Page No. 21-26.
  • 5
    Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, International Journal of Management Research and Technology (IJMRT), ISSN 0974-3502, Serials Publications, Volume 6, Number 2, July-December 2012, Page No. 165-174.
  • 6
    Ramachandra C G and T.R.Srinivas, “Management Information System (MIS) applied to Small Scale Industries”, International Journal of Business Research and Manufacturing Management (IJBRMM) ISSN 2231-5349 (Online) Business Management Research (BMR), Volume 2, Number 3, October-2012, Page No. 01-07.
  • 7
    Ramachandra C G and T.R.Srinivas, “Management information system applied to mechanical department of an engineering college”, International Journal of Research in Commerce & Management (IJRCM) ISSN 2231-5756 Volume 2, Issue 11, November-2012, Page No. 21-26.
  • 8
    Ramachandra C G and T.R.Srinivas, “Case Study on Comparison of Usage and Acceptance of Management Information System (MIS) in Medium Scale and Large Scale Organizations”, International Journal of Engineering, Science and Innovative Technology (IJESIT) ISSN: 2319-5967 Volume 1, Issue 2, November-2012, Page No. 125-134.
  • 9
    Ramachandra C G and T.R.Srinivas, “A Study on Development and Implementation of a Computerized Maintenance Management Information System for a Process Industry”, International Journal of Engineering and Innovative Technology (IJEIT)ISSN: 2277-3754 Volume 2, Issue 5, November-2012, Page No. 93-99.
  • 10
    Ramachandra C G and Vaishak N L, ”Development of ARM Based embedded system for robot application” International Journal of Engineering Science and Innovative Technology (IJESIT) ISSN: 2319-5967 Volume 1, Issue 2, November 2012
  • 11
    Ramachandra C G and Vaishak N L, “Embedded Robot Control System based on an Embedded Operating System, the Combination of RISC Microprocessor, DSP & ARM Linux”, International Journal of Engineering and Innovative Technology (IJEIT)ISSN: 2277-3754 Volume 2, Issue 6, December-2012. Page No. 143-147.
  • 12
    Ramachandra C G and T.R.Srinivas, “A Study on usage of Management Information System (MIS) in Medium to Large Scale Industries”, International Journal on Recent Trends in Engineering and Technology (IJRTET), ISSN 2158-5563 (Online) ISSN 2158-5555 (Print), Association of Computer Electronics and Electrical Engineers (ACEEE), Vol. 8, No. 1 January-2013, Page No. 60-63.
  • 13
    Ramachandra C G and Rizawan N Shaikh, “Prototype Model of Multi-load AGV for Material Supply in Manufacturing System”, International Journal of Inventive Engineering and Sciences (IJIES),ISSN: 2319-9598 Volume 1, Issue 8, July 2013. Page No. 01-05.
  • 14
    Ramachandra C G, Sharun Mendonca and John Paul Vas, “Influence of injection pressure on performance of Simarouba biodiesel engine”, International Journal of scientific and engineering research (IJSER) ISSN 2229-5518 volume 4, issue 7, July 2013, Page No. 668-672.
  • 15
    Ramachandra C G and Vaishak N L, “Based on the Combination of Advanced RISC Machines and ARM-Linux Development of ArM based Embedded System for Robot Applications”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278-7798 Volume 2, Issue 7, July-2013, Page No. 1469-1474.
  • 16
    Ramachandra C G and Vaishak N L, “Embedded Robot Control System using ARM for Robot Application”, Research & Technology In The Coming Decades (CRT-2013) ISBN: 978-1-84919-868-4, IEEE Explorer – Sept 2013, Page No. 01-05.
  • 17
    Ramachandra C G and T.R.Srinivas, “Design, Development and Implementation of Computerized Maintenance Management Information System (CMMIS) for a Selected Medium Scale Industry”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278-7798, Volume 2, Issue 8, August-2013, Page No. 1634-1643.
  • 18
    Ramachandra C G and T.R.Srinivas, “Application Of Computerized Management Information System(CMIS) For A Paint Manufacturing Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-3, Sept-2013, Page No. 01-12.
  • 19
    Ramachandra C G and Rohini M, “Optimization of Process Parameters For The Production of LH Channel Using CNC Milling”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 01-10.
  • 20
    Ramachandra C G and Adarsh Kumar H K, “GPS Based Remote Black Box for Airborne Vehicles”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 11-25.
  • 21
    Ramachandra C G and Krishna Pavana, “Design and Fabrication of Automotive Hydraulic Jack System for Vehicles”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 26-39.
  • 22
    Ramachandra C G and Rishi J P, “A Study On Implementation Of Lean Manufacturing Practices For An Automobile Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-7, Issue-1, Jan-2014, Page No. 01-09.
  • 23
    Ramachandra C G and T.R.Srinivas, “A Survey Conducted to Analyze the Factors Influences the Non-Usage of Management Information System (MIS) in Selected Large Scale Industries” International Journal ELSEViER ISBN: 2978-93-5107-222-5 March-2014.
  • 24
    Ramachandra C Gand Shruthi Y C, “Productivity Improvement of Castings, Switching to Shell Mould Process from Green Sand Mould Process”, International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163, pISSN: 2321-7308, Volume-3, Issue-5, May 2014, Page No. 594-598.
  • 25
    Ramachandra C G and Aaron Christopher Monis, “Automated CVD Reactor Cleaning System Using Relay”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278–7798 Volume-3, Issue-6, June-2014, Page No. 1764-1771.
  • 26
    Dr. Ramachandra C G and Srinath Pai, “Study of Fuel Injection Pressure and Injection Timing Effect on A Diesel Engine Performance And Emission”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-4, Issue-3, July-Sept 2014, Page No. 71-80
  • 27
    Dr. Ramachandra C G and Manjunatha B, “Waste Minimization Initiatives and Energy Conservation in Hotel Industries”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-4, Issue-3, July-Sept 2014, Page No. 81-89.
  • 28
    Dr. Ramachandra C G and T.R.Srinivas, “Condition Monitoring Of Dump Mill Of A Banbury Machine”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-1, Jan-2015, Page No. 32-39.
  • 29
    Dr. Ramachandra C G and Shruthi Y C, “Improvement In Productivity Of Castings By Switching From Green Sand Mould Process To Shell Mould Process”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-2, Feb-2015, Page No. 01-11
  • 30
    Dr. Ramachandra C G and Sandesh Hegde, “Cost Optimization Of Heating Ventilation Air Conditioning System (HVAC) By Using Building Management System”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-1, Jan-2015, Page No. 58-68.
  • 31
    Dr. Ramachandra C G and T.R.Srinivas, “A Study To Verify The Possible Reasons For The Non-Usage Of Management Information System (MIS) In Selected Medium Scale Industries”, International Journal of Transformations in Business Management (IJTBM) ISSN: 2231–6868 Volume-5, Issue-1, Jan-Mar 2015, Page No. 09-17.
  • 32
    Dr. Ramachandra C G and Sandeep Acharya, “Optimization Of Automated Granite Processing Plant”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-5, Issue-1, Jan-Mar 2015, Page No. 04-14.
  • 33
    Dr. Ramachandra C G and Dr. T.R.Srinivas, “Vibration Monitoring Of Blower In A Tyre Manufacturing Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-3, Mar-2015, Page No. 24-35.
  • 34
    Dr. Ramachandra C G and Rohini M, “Design Of CNC Milling Fixture For An Aluminum Aerospace Component”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-5, Issue-1, Jan-Mar 2015, Page No. 57-67
  • 35
    Dr. Ramachandra C G and Sandesh Hegde, “Heating Ventilation Air Condi- toning System Energy cost optimization by Using Building Management System”, International Journal For Scienti_c Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2303-2306.
  • 36
    Dr. Ramachandra C G and Sandeep Acharya, “Study and Optimization of Granite Processing Plant”, International Journal For Scientific Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2307-2311.
  • 37
    Dr. Ramachandra C G and Sandesh Hegde, “Central Heating Ventilation Air Conditioning System Energy cost optimization”, International Journal For Scientific Research & Development (IJSRD) ISSN: 2321-0613 Volume No.3 Issue No. 2, April 2015 Page No.2312-2316.
  • 38
    Dr. Ramachandra C G and Randesh Ramanath Kochrekar, “Design and Development of Multifunctional Robot using Rigid and Flexi-body Concept”, International Journal of Multidisciplinary Research and Modern Education (IJMRME) ISSN (Online): 2454-6119 Volume No.1 Issue No. 1, 2015 Page No.376-383
  • 39
    Dr. Ramachandra C GandManjunatha B, “Ecotel concept for energy conservation & waste reduction in hotel industries”, International Journal of Computer Applications (IJCA) ISSN: 0975-8887, Proceedings on NCPSIA-15, Number.01, December 2015 Page No.22-24
  • 40
    Dr. Ramachandra C GandRaghavendra M J, “A Review on Tool Flank Wear Monitoring by Tool Condition Monitoring System using Various Approaches”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703Volume No.1 Issue No. 4, March 2016 Page No.07-13.
  • 41
    Dr. Ramachandra C GandPrashanth Pai M, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries – A Review”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.346-350.
  • 42
    Dr. Ramachandra C GandRaghavendra M J, “A Study on Different Tool Condition Monitoring System Available to Monitor Tool Flank Wear”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.359-364.
  • 43
    Dr. Ramachandra C GandRudresh Gowda K G, “Development of Interfacing of Quick Change Robot for Tool Change between Tow CNC Machines & Reduction of Tool Changing Time”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.380-382.
  • 44
    Dr. Ramachandra C GandSandesh Hegde, “Permanent Magnet Propelled Vertical-Axis Wind Turbine”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.383-386.
  • 45
    Dr. Ramachandra C GandMajnunatha Prabhu, “Automatic Quantitative Sorting of Milk Packets on KMF Shimoga Dairy”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.396-398.
  • 46
    Dr. Ramachandra C GandManjunatha B, “Management Information System (MIS) in Hotel Industries to Improve Overall Efficiency”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.399-405.
  • 47
    Dr. Ramachandra C GandPalayat Roshen Hemanth, “Automation of an Industrial Grade Steam Generation System using GSM Technology”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.74-76.
  • 48
    Dr. Ramachandra C GandChandrahas Bekal, “Fracture Toughness of Structural Flaw Butt Joint Weld of Low Carbon Steels”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.95-99.
  • 49
    Dr. Ramachandra C GandVinayaka Kannantha, “Permanent Automatic Distance Measurement and Breaking for Automobile/AGV (Automated Guided Vehicle) Using Ultrasonic Waves and Accident Detection by GSM”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.100-103.
  • 50
    Dr. Ramachandra C GandRahul E K, “Automated Railway Signalling and Interlocking System Design Using PLC and SCADA”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.01-05.
  • 51
    Dr. Ramachandra C GandLokesh K S, “Effect of E-WasteFiller on Tensile and Flexural Behavior of E- Glass/Epoxy Composites”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.184-188.
  • 52
    Dr. Ramachandra C GandNeetha K, “A Study on Implementation of Total Quality Management (TQM) in Hospital to Improve Service Quality”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.22-25.
  • 53
    Dr. Ramachandra C GandRishi J P, “Keys to Succeed in Implementing Total Preventive Maintenance (TPM) and Lean Strategies”, International Journal for Modern Trends in Science & Technology (IJMTST) ISSN: 2455-3778, Volume No.2 Issue No. 7, July-2016 Page No.25-30.
  • 54
    Dr. Ramachandra C GandRishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Engineering Technology, Management & Applied Sciences (IJETMAS) ISSN: 2349-4476, Volume No.4 Issue No. 8, August-2016 Page No.74-81.
  • 55
    Dr. Ramachandra C GandPrashanth Pai M, “OEE – A Tool to Measure the Effectiveness of TPM Implementation in Industries – A Review”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703Volume No.1 Issue No. 12, November 2016 Page No.92-96.
  • 56
    Dr. Ramachandra C GandRishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Advances in Scientific Research & Engineering (IJASRE) ISSN: 5454-8006, Volume No.2 Issue No. 10, November-2016 Page No.01-07.
  • 57
    Dr. Ramachandra C G and Prashanth Pai M, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.179-182.
  • 58
    Dr. Ramachandra C G and Raghavenra M J, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.108-113.
  • 59
    Dr. Ramachandra C G and Sandesh Hegde, “Efficiency Improvement of the Vertical Axis Wind Turbine by Implementing Permanent Magnet Propelling Phenomena”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.235-238.
  • 60
    Dr. Ramachandra C G and Rishi J P, “Development of Framework for Lean Manufacturing Implementation in SMEs”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.243-248.
  • 61
    Dr. Ramachandra C G and Prashanth Pai M, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.305-311.
  • 62
    Dr. Ramachandra C G and T R Srinivas, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.174-178.

National Journal – Papers Published

  • 1
    Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System applied to a Process Industry”, Journal of Advances in Mechanical Engineering NAME-10, ISBN 978-81-8424-623-0 pp.480-485 Allied Publishers Pvt. Ltd. New Delhi-2010.
  • 2
    Ramachandra C G and T.R.Srinivas, “Computer Aided Maintenance Management Information System for A Tyre Manufacturing Industry”, Proceeding of International Conference on Advances in Manufacturing Technology (ICAMT-2012), June 2012.
  • 3
    Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, Proceedings of International Conference on Current Trends in Engineering ICCTEM-2012,ISBN 978-93-5051-905-9, July 2012.
  • 4
    Ramachandra C G and Vaishak N. L, “Embedded Robot Control System based on an embedded operating system along with ARM for Robot Application”, Proceeding of International Conference on Control, communication and Computer Technology (ICCCCT), ISBN: 978-93-82208-41-9, 2012, Page no. 34-38.
  • 5
    Ramachandra C G and T.R.Srinivas, “A Study to Find Out the Influencing Factors for Non-Usage of Management Information System in Selected Small Scale Industries”, Indian Journal of Mechanical Engineering and Research (IJMER) ISSN: 2223-5329, Vol-1, No-1, Aug-2013.

International Conference – Papers Presented

  • 1
    Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System Used in Maintaining the Maintenance Activities of a Process Industry” International Conference on Operational Excellence for Global Competitiveness ICOEGC – 2011, R.V. College of Engineering, Bangalore, 3-5th February 2011.
  • 2
    Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Medium to Large Scale Industries”, International Conference on Mechanical Engineering Technology ICOMET-2012, St. Joseph’s College of Engineering & Technology. Kottayam, 20th and 21stJanuary 2012.
  • 3
    Ramachandra C G and T.R.Srinivas, “Acceptance and Usage of Management Information System in Small Scale and Medium to Large Scale Industries”, IEEE International Conference on Advances in Engineering, Science and Management IEEE-ICAESM-2012, EGS Pillay Engineering College, Nagapattinam, 30th and 31stMarch 2012.
  • 4
    Ramachandra C G and T.R.Srinivas, “Study on Usage of Management Information System (MIS) in Medium Scale Industries”, International Conference on ‘Recent Advances in Mechanical Engineering INCRAME-2012, Dr. M.G.R Educational and Research Institute University, Chennai, 19th and 20thApril 2012.
  • 5
    Ramachandra C G and T.R.Srinivas, “Computer Aided Maintenance Management Information System for A Tyre Manufacturing Industry”, International Conference on Advances in Manufacturing Technology ICAMT-2012, Chennai Institute of Technology, Chennai, 15-17thJune 2012.
  • 6
    Ramachandra C G and T.R.Srinivas, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, International Conference on Current Trends in Engineering ICCTEM-2012, VidyaVardhaka College of Engineering, Mysore, 12-14thJuly 2012.
  • 7
    Ramachandra C G and T.R.Srinivas, “Management Information System (MIS) applied to Small Scale Industries”, International Conference on Application of Optimization Techniques in Engineering ICAOTE-2012, Kodaikenal, 27th and 28thSeptember2012.
  • 8
    Ramachandra C G and Vaishak N. L, “Embedded Robot Control System based on an embedded operating system along with ARM for Robot Application”, International Conference on Control, communication and Computer Technology (ICCCCT) held at Bangalore-2012.
  • 9
    Ramachandra C G and T.R.Srinivas, “Application of Computerized Management Information System (MIS) For A Paint Manufacturing Industry”, IEEE International Conference on Research and Development Prospects on Engineering and Technology IEEE-ICRDPET-2013, EGS Pillay Engineering College, Nagapattinam, 29th and 30thMarch 2013.
  • 10
    Ramachandra C G and T.R.Srinivas, “A Survey Conducted to Analyze the Factors Influences the Non-Usage of Management Information System (MIS) in Selected Large Scale Industries”, International Conference on Recent Trends in Engineering and Technology ELSEVIER-ICRTET-2014, SNJB’s Late Sau K.B. Jain College of Engineering, Chandwad, 28th to 30th March 2014.
  • 11
    Ramachandra C G and Shruthi Y C, “Productivity improvement of castings switching to shell mould process from greensand mould process”, 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014) organized by Vidyavardhaka College Of Engineering Mysore during 17- 19 July 2014.
  • 12
    Ramachandra C G and Rishi J P, “A Study on Implementation of Lean manufacturing Practices with Special Reference to Automobile Industry”, 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014) organized by Vidyavardhaka College Of Engineering Mysore during 17- 19 July 2014.
  • 13
    Dr. Ramachandra C G and Prashanth Pai M, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.
  • 14
    Dr. Ramachandra C G and Raghavenra M J, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.
  • 15
    Dr. Ramachandra C G and Sandesh Hegde, “Efficiency Improvement of the Vertical Axis Wind Turbine by Implementing Permanent Magnet Propelling Phenomena”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.
  • 16
    Dr. Ramachandra C G and Rishi J P, “Development of Framework for Lean Manufacturing Implementation in SMEs ”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.
  • 17
    Dr. Ramachandra C G and Prashanth Pai M, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.
  • 18
    Dr. Ramachandra C G and T R Srinivas, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.

National Conference – Papers Presented

  • 1
    Ramachandra C G and T.R.Srinivas, “Management Information System in Maintenance an Approach”, National Seminal on Changing Frontiers of Industrial Development in India”, Srinivas Institute of Technology Mangalore, 26th and 27th April 2009
  • 2
    Ramachandra C G and T.R.Srinivas, “Maintenance Management Information System applied to a Process Industry”, National Conference on Advances in Mechanical Engineering, NAME-2010, Jawaharlal Nehru National College of EngineeringShimoga, 24th and 25th September 2010
  • 3
    Ramachandra C G and T.R.Srinivas, “Maintaining the Maintenance Activities by using Maintenance Management Information System”, National Conference on Advances in Mechanical Engineering AIMEngg-2011, Manipal Institute of Technology Manipal, 3rd -5th January 2011
  • 4
    Ramachandra C G and T.R.Srinivas, “Design and Development of Maintenance Management Information System”, National Seminar on Emerging Trends in Indian Service Sector, Srinivas Institute of Technology Mangalore, 26th and 27th April 2011.
  • 5
    Ramachandra C G and T.R.Srinivas, “Design and Development of Computer Aided Maintenance Management Information System for a Tyre Manufacturing Industry”, National Research Conference on Innovative Paradigms in Contemporary Management PINNACLE– 2012, S.B. Jain Institute of Technology Nagpur, 28th January 2012
  • 6
    Ramachandra C G and T.R.Srinivas, “A Study on Implementation of Maintenance Management Information System for Indian Industries”, National Seminar on Emerging Trends in Indian Service Sector, Srinivas Institute of Technology Mangalore,26th and 27thApril 2012.
  • 7
    Ramachandra C G and T.R.Srinivas, “Importance of Computerized Maintenance Management System for Small Scale Industries”, National Seminar on Business in Global Economy: Issues &Challegnes, Srinivas Institute of Technology Mangalore,26thApril 2013.
  • 8
    Ramachandra C G and Rohini M, “Design of CNC Milling Fixture for an Aluminum Aerospace Component” National Conference on “Emerging Trends in Engineering Management”, organized by Dept. of Industrial Engineering and Management, held at JSS Academy of Technical Education, Bangalore during 4th and 5th of July 2013.
  • 9
    Ramachandra C G and Rizawan N Shaikh, “Prototype Model Of Multi-Load AGV For Material Supply In Manufacturing System”, National Conference Challenges In Research & Technology In The Coming Decades (CRT-2013) at Shree Dharmasthala Manjunatheshwara Institute Of Technology Ujire during 27th & 28th September 2013.
  • 10
    Ramachandra C G and Vaishak N L, “Embedded Robot Control System using ARM for Robot Application”, National Conference Challenges In Research & Technology In The Coming Decades (CRT-2013) at Shree Dharmasthala Manjunatheshwara Institute Of Technology Ujire during 27th & 28th September 2013.
  • 11
    Ramachandra C GandShruthi Y C, “Productivity Improvement of castings, switching to Shell mould process from Green sand mould process”, A National level technical paper presentation contest at K.V.G.C.E, Sullia on 25th April 2014
  • 12
    Dr. Ramachandra C GandChandrahas Bekal, “Determination of fracture toughness of through thickness structural flaw butt joint weld of low carbon steels subjected to tensile loading”, A National level technical paper presentation contest at K.V.G.C.E, Sullia on 11th April 2015.
  • 13
    Dr. Ramachandra C Gand Sandeep Acharya, “Study and Optimization of Granite Processing Plant”, National Joint Conference on Innovations in Engineering and Technology (NJCIET-15) at CEC, Bantawal on 29th April 2015.
  • 14
    Dr. Ramachandra C GandSandesh Hegde, “Central Heating Ventilation Air Conditioning System Optimization for Reduction of Energy Consumption”, National Joint Conference on Innovations in Engineering and Technology (NJCIET-15) at CEC, Bantawal on 29th April 2015
  • 15
    Dr. Ramachandra C GandSandesh Hegde, “Energy Cost Optimization of Heating Ventilation Air Conditioning System (HVAC) by using Building Management System”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • 16
    Dr. Ramachandra C GandSandeep Acharya, “Study and Optimization of Granite Plant with Process Improvement”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • 17
    Dr. Ramachandra C GandSandesh Hegde, “Cost Optimization of Heating Ventilation Air Conditioning System (HVAC) for Reduction of Energy Consumption”, National Conference on Research in Science, Engineering and Management (NCRSEM-15) at PESITM, Shivamogga on 2nd May 2015.
  • 18
    Dr. Ramachandra C GandManjunatha B, “Ecotel concept for energy conservation &waste reduction in hotel industries”, National Conference On Power Systems & Industrial Automation (NCPSIA-15) at GSSIETW, Mysuru on 22nd August 2015.
  • 19
    Dr. Ramachandra C GandMohammed Gowspeer, “A Study on Learning and Teaching Styles in Engineering Education”, Two Day NAAC Sponsored National Seminar on Curriculum Design and Development for Student-Centric Learning at SIMS, Mangaluru, 25th& 26th March-2016.
  • 20
    Dr. Ramachandra C GandPrashanth Pai M, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries – A Review”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016.
  • 21
    Dr. Ramachandra C GandRaghavendra M J, “A Study on Different Tool Condition Monitoring System Available to Monitor Tool Flank Wear”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016.
  • 22
    Dr. Ramachandra C GandRudresh Gowda K G, “Development of Interfacing of Quick Change Robot for Tool Change between Tow CNC Machines & Reduction of Tool Changing Time”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016
  • 23
    Dr. Ramachandra C GandSandesh Hegde, “Permanent Magnet Propelled Vertical-Axis Wind Turbine”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016.
  • 24
    Dr. Ramachandra C GandMajnunatha Prabhu, “Automatic Quantitative Sorting of Milk Packets on KMF Shimoga Dairy”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016.
  • 25
    Dr. Ramachandra C GandManjunatha B, “Management Information System (MIS) in Hotel Industries to Improve Overall Efficiency”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016.
  • 26
    Dr. Ramachandra C GandPalayat Roshen Hemanth, “Automation of an Industrial Grade Steam Generation System using GSM Technology”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016.
  • 27
    Dr. Ramachandra C GandChandrahas Bekal, “Fracture Toughness of Structural Flaw Butt Joint Weld of Low Carbon Steels”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016
  • 28
    Dr. Ramachandra C GandVinayaka Kannantha, “Permanent Automatic Distance Measurement and Breaking for Automobile/AGV (Automated Guided Vehicle) Using Ultrasonic Waves and Accident Detection by GSM, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016
  • 29
    Dr. Ramachandra C GandRahul E K, “Automated Railway Signalling and Interlocking System Design Using PLC and SCADA”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016
  • 30
    Dr. Ramachandra C GandNeetha K, “A Study on Implementation of Total Quality Management (TQM) in Hospital to Improve Service Quality, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016
  • 31
    Dr. Ramachandra C GandLokesh K S, “Effect of E-WasteFiller on Tensile and Flexural Behavior of E- Glass/Epoxy Composites”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th& 7th MAY-2016

Faculty name: Chandra Jogi

Publications – Before Joining SIT
International Journal – Papers Published

  • 1
    Chandra Jogi and Parkash Ratan, “ Auto Metro Train to Shuttle Between Stations,” International Journal and Magazine of Engineering, Technology, Management and Research (IJMETMR), ISSN: 2320-3706, ISSN: 2348-4845(Online): vol. 2, Issue 5, May2015.
  • 2
    Chandra Jogi and Parkash Ratan, “ A Driverless Metro Train using ARM7,” International Journal of Innovative Research in Science, Engineering and Technology(IJIRSET), ISSN: 2341-6710, ISSN: 2319-8753(Online): vol. 4, Issue 6, June 2015.
  • 3
    Sudheendra H N and Chandra Jogi “A Review on Effect of Chemical Modification on Mechanical Properties of Sugarcane Bagasse Fiber Polymer Composite”, International Journal of Emerging Trends and Technology (Special issue NCAMES-2016), ISSN: 2231-5381, pp 19-21.
  • 4
    Chandra Jogi and Sudheendra H N, “Study of EDM parameters on Surface Finish of Hot Die Steel – H13”, International Journal of Emerging Trends and Technology (Special issue NCAMES-2016), ISSN: 2231-5381, pp 77-84.

International Conference – Papers Presented

  • 1
    ”Auto Metro Train to Shuttle Between Stations” International Conference on Emerging Trend in Engineering and Technology, IFERP, 31st May 2015 at Bangalore.

National Conference – Papers Presented

  • 1
    ”Study of EDM parameters on Surface Finish of Hot Die Steel – H13”, NCAMES-2016, May 6th& 7th 2016 at Srinivas Institute of Technology, Valchil, Mangaluru.

Faculty name: Raghavendra M J

Publications – After Joining SIT
International Journal – Papers Published

  • 1
    Raghavendra M J & Dr. Ramachandra C G, “A Review on Tool Flank Wear Monitoring by Tool Condition Monitoring System using Various Approaches”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703Volume No.1 Issue No. 4, March 2016 Page No.07-13.
  • 2
    Raghavendra M J & Dr. Ramachandra C G, “ A study on Different Tool Condition Monitoring System Available to Monitor Tool-Flank Wear”, , International Journal of Engineering Trends and Technology (IJETT), Spl. Issue, p-ISSN: 2349-0918, e-ISSN: 2231-5381, pp.359-364.
  • 3
    Raghavendra M J & Dr. Ramachandra C G, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries- A Review” , International Journal of Engineering Trends and Technology (IJETT), Spl. Issue, p-ISSN: 2349-0918, e-ISSN: 2231-5381, pp.346-350.
  • 4
    Raghavendra M J & Dr. Ramachandra C G, “OEE – A Tool to Measure the Effectiveness of TPM Implementation in Industries – A Review”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703Volume No.1 Issue No. 12, November 2016 Page No.92-96.
  • 5
    Raghavendra M J & Dr. Ramachandra C G, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.179-182.
  • 6
    Raghavendra M J and Dr. Ramachandra C G, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.108-113.
  • 7
    Raghavendra M J and Dr. Ramachandra C G, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.305-311.
  • 8
    Raghavendra M J and Dr. Ramachandra C G, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.174-178.

International Conference – Papers Presented

  • 1
    Raghavendra M J & Dr. Ramachandra C G, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.
  • 2
    Raghavendra M J & Dr. Ramachandra C G, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.
  • 3
    Raghavendra M J & Dr. Ramachandra C G, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.
  • 4
    Raghavendra M J & Dr. Ramachandra C G, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th& 12th March 2017.

National Conference – Papers Presented

  • 1
    Raghavendra M J & Dr. Ramachandra C G, “ A study on Different Tool Condition Monitoring System Available to Monitor Tool-Flank Wear”, Proceedings of the National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016), Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 6-7 May 2016.
  • 2
    Raghavendra M J & Dr. Ramachandra C G, “Effect of Total Productive Maintenance Implementation in Manufacturing and Service Industries- A Review”, Proceedings of the National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016), Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 6-7 May 2016.

Faculty name: Nithin Joshuva

Publications – After Joining SIT
International Journal – Papers Published

  • 1
    Nithin joshuva. ” Study and analysis of process capability of 4000 ton Mechanical press using 8D method ” IJETT , NCAMES, May 2016.
  • 2
    Nithin joshuva & Dr Thomas Pinto, ” A study on Analysis of condition based maintenance for general purpose machineries for fault diagnostic -A review , IJETT , May 2016
  • 3
    Nithin joshuva , criston vinuth ,” Compression behaviour of Al6061 / Al203 graphite hybrid composite materials” , NCAMES , May 2016

Faculty Name: Naveen C R

Publications – After Joining SIT
International Journal – Papers Published

  • 1
    Mr. Naveen C R, Thomas Pinto.,“A study on mechinability of hybrid metal matrix composites- A review”, National Conference on AMES, SIT, Mangaluru, May 6th -7th 2016, IJETT, P-ISSN: 2349-0918.
  • 2
    Mr. Naveen C R, Somashekar L S.,“Flow analysis by using moldflow software for chair handle part”, National Conference on AMES, SIT, Mangaluru, May 6th -7th 2016, IJETT, P-ISSN: 2349-0918.
  • 3
    Mr. Naveen C R, Thomas pinto, Ranganath Y H.,“Production and characterization of As cast and heat treated Al2024/SiC/Gr hybrid metal matrix composite”, ICAMS, MCE, Hassan, March 4th -5th 2017, IJESRT, ISSN: 2277-9655.
  • 4
    Mr. Naveen C R, Thomas pinto, Kiran Holla.,“EDS analysis and mechanical testing of alumina and graphite particulate aluminium metal matrix composite”, ICAMS, MCE,Hassan, March 4th -5th 2017, GJESR, ISSN: 2348-8034

International Conference – Papers Presented

  • 1
    Mr. Naveen C R, Ramesh babu K.,“Design development and analysis of single cavity injection mould tool for chair handle component”,International conference on ETMR, toc H IST, Kochi, Sep 5th& 6th 2012.
  • 2
    Mr. Naveen C R, Ramesh babu K.,“Optimizing of the cycle time using conformal cooling for a chair handle part”, International Conference on COMIM, MSRIT, Bangaluru, Feb 11th -13th 2012.

National Conference – Papers Presented

  • 1
    Mr. Naveen C R, Ramesh babu K.,“Influence of gate location in the production of a chair handle”, National conference on CAME, KVCET, Kanchipuram, Tamilnadu, Feb 29th 2012.
  • 2
    Mr. Naveen C R, Ramesh babu K.,“Design of stacked injection mould tool for inside bracket of pick up head”, National Conference on ETME, RRCE, Bangaluru, Feb 24th and 25th 2012.
  • 3
    Mr. Naveen C R, Revanna siddappa, Venkatesh K C.,“Mechanical and wear behaviour of Al6061-SiC-Gr Hybrid composites”, National Conference on AMES,SIT, Mangaluru, May 6th -7th 2016, IJETT, P-ISSN: 2349-0918.
  • 4
    Mr. Naveen C R, Sathisha K G., “Fabrication and Characterization of as cast and heat treated Al2024/Al2O3/Gr hybrid metal matrix composites”, national conference on TTMT, SJBIT, Banglore, May 10th 2017.

Faculty name: Ranghanath Y H

Publications – After Joining SIT
International Journal – Papers Published

  • 1
    Ranganatha Y H . “Investigation On The Effect Of Heat Treatment On Microstructure And Tribological Behavior Of Aisi 2507 Dss.” The International Journal of engineering trends and technology (IJETT), vol. ISSN, pp. 2231-5381, 6th and 7th MAY. 2016, Srinivas Institute of Technology, Mangaluru.
  • 2
    Ranganatha Y H. “Production and Characterization of Cast Heat Treated Al2024/SiC/Gr Hybrid Metal Matrix Composites” International Journal of Engineering Science and Research Technology ISSN: 2277-9655, March-2017.

Faculty name: Harshavardhan L Hegde

Publications – After Joining SIT
International Journal – Papers Published

  • 1
    M.C. Math and Harshavardhan L. Hegde, “Experimental studies on performance and combustion characteristics of a compression ignition engine fuelled with Hydnocarpus wightiana methyl ester and its blends with conventional diesel and domestic kerosene “, ISSN: 1759-7269, Biofuels 2017, Taylor & Francis
  • 2
    M.C. Math and H. Hegde, “Application of Response Surface Methodology for Optimization of Biodiesel Production by Transesterification of Hydnocarpus Wightiana Seed Oil with Methanol”, International journal of renewable energy research, Vol.6, No.4, 2016
Quick Links