Aeronautical

International Journals:

• 1
  Thomas Pinto, S. George Milton, Gangadhara Rao, Feb. 2013, Influence of Vegetable Oil used Cutting Fluids on Tool Wear and Surface Roughness in Turning EN8 steel using tungsten carbide tool, Journal of Manufacturing Technology Today, Vol. 12, No. 2, pp 5-10.
• 2
  SharunMendonca, John Paul Vas, Raghu, Gangadhara Rao, Dr. Thomas Pinto, Dr. C. R. Rajashekhar, Ramachandra C. G. July 2013, Influence of Injection Pressure on Performance of Simarouba Bio-diesel Engine, International Journal of Science and Engineering, Vol. 4, Issue 7, pp -668-672.
• 3
  Gangadhara Rao, Kumar G.N, Mervin A Herbert, May 2016 , Effects of Additives on Biodiesel/Diesel Performance, Emission Characteristics and Properties, International Journal of Engineering Trends and Technology, Special issue NCAMES May 2016, pp-22-27
• 4
  Gangadhara Rao, Kumar G.N, Mervin A Herbert, Impact of Advancing and Retarding the Injection timing on the performance and emission characteristics of CI engine using Vateria IndicaBiodiesel, International journal of Ambient Energy (Taylor & Francis) (Under Review)
• 5
  Gangadhara Rao, Kumar G.N, Mervin A Herbert, May 2016 , Effects of Additives on Biodiesel/Diesel Performance, Emission Characteristics and Properties, International Journal of Engineering Trends and Technology, Special issue NCAMES May 2016, pp-22-27.
• 6
  Gangadhara Rao, Kumar G.N. Mervin A Herbert, Effect Of Fuel Injection Pressure And Injection Timing On Combustion Of Vateria indicaBiodiesel 25th National Conference on Internal Combustion Engines and Combustion. 15 - 17 December 2017 NITK Surathkal Dec 2017.

Conference publication

• 1
  Gangadhara Rao, “Effect of Injection Pressure and Injection Timing on The Performance And Emission Characteristics Of CI Engine Using Vataria Indica Biodiesel”, 3rd International Conference on Advances in Mechanical Engineering and Nanotechnology - ICAMEN2021, NIT Uttarakhand, Manipal -Jaipur University, Feb 28, 2021

International Journals:

• 1
  Shenoy, P., & Gangadharan, K. V. (2019). A novel method for dynamic characterization of angular displacement-dependent viscoelastic properties of Magnetorheological Elastomer under torsional loading conditions. Smart Materials and Structures. (IOP Science) [DOI: https://doi.org/10.1088/1361-665X/ab1f34 ]
• 2
  Shenoy, K. P., Poojary, U., & Gangadharan, K. V. (2020). A novel approach to characterize the magnetic field and frequency-dependent dynamic properties of magnetorheological elastomer for torsional loading conditions. Journal of Magnetism and Magnetic Materials, 166169.(Elsevier) [DOI: https://doi.org/10.1016/j.jmmm.2019.166169 ]
• 3
  Shenoy, K. P., Singh, A. K., Raman, K. S. A., & Gangadharan, K. V. (2020) Performance of magnetorheological elastomer based torsional vibration isolation system for dynamic loading conditions. Journal of Central South University (Springer) [DOI: https://doi.org/10.1007/s11771-020-4284-3 ]

International Journals:

• 1
  Shenoy, K. P., Singh, A. K., Raman, K. S. A., & Gangadharan, K. V. (2018). Experimental investigation of torsional vibration isolation using Magneto Rheological Elastomer. In MATEC Web of Conferences (Vol. 144). EDP Sciences. [DOI: https://doi.org/10.1051/matecconf/201814401007 ]

National Journals:

• 1
  Purshotham P Katti “Electrical Energy Harvesting In Aircraft By Using Carbon Fiber Battery” (ISSN-2349-5162) Paper Id: JETIR 1905C61.
• 2
  Purshotham P Katti “Displaying Of Cockpit Instruments Using Processing IDE and ARDUINO” (ISSN-2349-5162) Paper Id: JETIR 1905G10.
• 3
  Purshotham P Katti “Design, Aerodynamic analysis and Fabrication of Eppler61 Airfoil (chord = 10.03% of chord)” ISSN: 2349-6002.

International Journals:

• 1
  Published research paper titled Experimentation and Prediction Analysis on the Mechanical Performance of Fish Scale and Coconut Shell Powder-Based Composites in the Journal of Natural fibers, Taylor and Francis (SCIE-indexed with Q1 ranked, impact fctor-5.23)- Volume-18,Issue-10-2021
• 2
  Published a paper titled-CO2 detection: using the polyethyleneimine–cerium oxide nanocomposite sensing film coated on interdigitated electrode prepared from copper clad in Material Research Innovation -Taylor and Francis Journal (Scopus indexed –Q3 ranked, IF-2.24)- Volume-25,Issue-01,Jan-2021
• 3
  Published the Paper in Elsevier -Materials Today-(Scopus indexed)Proceedings for the Paper titled Hybridization effect on Water absorption and flexural Properties of E-glass/banana fibre/epoxy composites in the conference Proceedings –SME-2021
• 4
  Accepted for Publication and currently under production for the Paper titled Antagonistic Study of Phytophthora Species against Trichoderma Viride in Areca Nut Plant Disease in Elsevier -Materials Today-(Scopus indexed)Proceedings –SME-2021
• 5
  Published the Paper in Elsevier -Materials Today-(Scopus indexed)Proceedings for the Paper titled Development and experimental investigation of mechanical properties of Graphene-based aluminum 6061 alloys in the conference Proceedings –SME-2020
• 6
  Published the paper in Elsevier -Materials Today-(Scopus indexed) for the Paper titled Experimental Study on Preparation and Mechanical Characteristics of Jute/Silk/Coco-peat Reinforced with Epoxy Polymers in the conference Proceedings –SME-2020
• 7
  Published a paper titled; A potential application of polyethyleneimine-reduced graphene oxide nano composite sensing film coated on interdigitated electrode prepared from copper-clad for carbon dioxide detection in Material Research Innovation - Taylor and Francis Journal (Scopus indexed –Q3 ranked with IF-2.24) - Volume-24,Issue-06,Sep-2020
• 8
  Published a paper titled; Effect of Iron Oxide Nano Particles on Bio-gas Production and Study of Microbial Analysis and its Slurry uses in Agricultural Field in GRD journal of Engineering,Volume-05,Issue-11 on November -2020
• 9
  Published a paper titled Investigation on performance of DC motor in exhaust application using vibration based condition monitoring. PalArch’s Journal of Egypt / Egyptology, -(Scopus indexed) 17(9), 1278 - 1285.November 2, 2020
• 10
  Published a Paper on Research on Combination of Swing Wing with Canard and Tail used in Fighter Aircraft International Journal of Recent Technology and Engineering (IJRTE-Scopus Indexed).ISSN: 2277-3878, Volume-8, Issue-2S3, July 2019
• 11
  Published a Paper in Elsevier -Materials Today-(Scopus indexed) for the Paper titled Experimental evaluation of substrate and annealing conditions on ZnO thin films prepared by sol-gel method from the conference proceedings of IconAmma-2018.
• 12
  Published Paper in International Journal of Mechanical and Production Engineering Research and Development (IJMPERD-Scopus Indexed). ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 8, Issue 4, Aug 2018, 881-890, Effect Of Bio- Filler on Tensile And Compressive Behavior Of Bidirectional E-Glass Reinforced With Epoxy Plastics.
• 13
  Published Paper in International Journal of Mechanical Engineering and Technology (IJMET-Scopus Indexed with IF-9.62). Volume 9, Issue 1, January 2018, pp. 327–335, Article ID: IJMET_09_01_035 titled Determination of Compressive Strength of Graphene Reinforced with Aluminium-7075 Metal Matrix Composites.
• 14
  Published a paper in American Institute of Physics (AIP) -(Scopus indexed)Conference Proceedings-2018 for the Paper titled First Pass Yield Improvement in Fuel Injection Pump Delivery Valve Assembly.
• 15
  Published a paper in American Institute of Physics (AIP) -(Scopus indexed) Conference Proceedings-2018 for the Paper titled Effect of E-waste Rubber on Mechanical Behavior of Glass fiber Reinforced with Epoxy Composites.
• 16
  Published Paper in International Journal of Engineering &Information Systems, ISSN: 2000-000X, Vol.3, Issue 12, December-2019,pp-28-30, Demonstration of Collective and Cyclic Pitch Control of Helicopter Swash Plate
• 17
  Published a Paper in International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 3 Issue 2, pp. 01-07, March-April 2019 "Assessment of Axial Cramp Resistance of Graphene based Aluminum Nano Composites by Stir Casting Technique ",
• 18
  Published a Paper in International Conference on Recent Trends in Arts, Science, Engineering and Technology ISBN: 978-81-939938-3-5 volume-2 2018/12/30,pp-179, Utilization And Mechanical Testing of Scraped Glass Powder Loaded With GFRP Composites.
• 19
  Published a Paper in International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), ISSN : 2457-0435, Volume 3 Issue 2, pp. 01-07, March-April 2019 " Examination of Modulus of Rupture of Fibre mat Bonded with Potential Adhesives",
• 20
  Published a Paper in International Journal of Scientific Research in Mechanical and Materials Engineering, volume 3 Issue 1, pp. 10-17, January-February 2019.titled Experimental Study on Effect of Silicon Carbide and Graphite particles on Mechanical Behavior of Alluminium-6061 Alloys
• 21
  Published a Paper in International Journal of Scientific Research in Mechanical and Materials Engineering, Volume 3 Issue 1, pp. 18-23, January-February 2019.titled Preparation and Mechanical Testing of E-waste Glass Filled Polymer Composites.
• 22
  Published Paper in International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 09 | August-2018, p-ISSN: 2395-0072, Preparation and Tensile Strength Evaluation of Synthetic Fibers Sandwiched with Foam Structures.
• 23
  Published Paper in International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 09 | August-2018, p-ISSN: 2395-0072, Evaluation of Toughness on Varied Thickness of Chopped Strand Mat /PU-foam Sandwich Structures.
• 24
  Published a Paper in International Journal of Scientific Research in Mechanical and Materials Engineering, Volume 2 | Issue 4 | sep-October, 2018 Page No:29-35 titled Study on Processing and Axial loading Conditions of Light weight Materials.
• 25
  Published a Paper in International Journal of Scientific Research in Mechanical and Materials Engineering, Volume 2 | Issue 3 | July-august, 2018 Page No:29-35 titled Impact of Modified Thickness on Flexural Modulus of PU-Foam /CSM Glass Fabric Sandwich Panels.
• 26
  Published Paper in International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 08 | August-2018, p-ISSN: 2395-0072, Synthesis and Study on Effect of Thickness on 3-point Bending Strength of Sandwich Composites.
• 27
  Published Paper in International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 06 | June-2018, p-ISSN: 2395-0072, Experimental Study on Effect of Metallic Oxides Mixture on Tribological Behavior of Aluminum Based Metal Matrix Composites.
• 28
  Published a Paper in International Journal of Academic Engineering Research (IJAER) ISSN: 2000-001X Vol. 2 Issue 7, July – 2018, Pages: 20-24, Determination of Scratch Resistance of Graphene based Nano Composites.
• 29
  Published a Paper in International Journal of Scientific Research in Mechanical and Materials Engineering, Volume 2 | Issue 1 | June 2018 Page No:11-16 titled Experimental Study on Tribological Characteristics of E-waste filled Fibre Reinforced Plastics.
• 30
  Published a Paper in International Journal of Creative Research Thoughts (IJCRT), IJCRT1802727, and Volume 6 | Issue 1 | March 2018 Page No: 302-307 Critical Review on Automobile Applications Of Hybrid Fibre Reinforced Plastics.
• 31
  Published Paper in International Journal of. Advances in Scientific Research and Engineering(ijasre).E-ISSN:2454-8006.DOI:. http://dx.doi.org/10.7324/IJASRE.2018.32624 Volume 4, Issue 3. March - 2018 www.ijasre.net. Page 20. Effect of E-waste Rubber on Wear Behaviour of Glass fibre. Reinforced with Epoxy Composites.
• 32
  Published Paper in American Journal of Aerospace Engineering. Vol. 5, No. 1, 2018, pp. 24-29. doi: 10.11648/j.ajae.20180501.14 Effect of Red Mud Particles on Scratch Resistance of Aluminium Based Metal Matrix Composites.
• 33
  Published Paper in International Journal of Innovative Science and Research Technology ISSN No:-2456 –2165, Volume 2, Issue 12, December– 2017, Influence of Graphene on Hardness Number of Aluminium-7075 based Metal Matrix Composite.
• 34
  Published Paper in International Journal of Current Trends in Science &Technology; online ISSN;0976-9730,Print ISSN;0976-9498, Fatigue Crack Growth Analysis of a Wing Stiffened Panel
• 35
  Published Paper in International Journal of Engineering &Information Systems, ISSN: 2000-000X, Vol.1, Issue 05, july-2017,Effect of tool wear & machinability studies on polymer composites; A Review
• 36
  Published Paper in International Journal of Engineering &Information Systems, ISSN: 2000-000X, Vol.1, Issue 04, june-2017, Evaluation of Mechanical Properties and Wear Characterization of Polymer Composites under Varying Temperature Conditions: A Review
• 37
  Published paper in International Journal of Science and Research (IJSR), volume 06, Issue 05, May-2017 with paper entitled “A Review on methods of extraction of various kinds of bio-fuels”.
• 38
  Published Paper in International Journal of Engineering &Information Systems, ISSN: 2000-000X, Vol.1, Issue 02, April-2017. Experimental Investigation of Flexural Strength of E-glass/epoxy Composites.
• 39
  Published paper in International Journal of Engineering sciences & Research Technology, ISSN: 2277-9655, ICAMES-2017 with paper entitled Comparative study on Tensile behavior of E-glass (woven & chopped) fibers reinforced with Epoxy composite.
• 40
  Published paper in International Journal of Engineering Trends and Technology, ISSN: 2231-5381,NCAMES-2016 with paper entitled Effect of E-waste filler on tensile and flexural behavior of E-glass/Epoxy composites.
• 41
  Published paper in International Journal of Engineering Trends and Technology, ISSN: 2231-5381,NCAMES-2016 with paper entitled Fabrication of Semi Automatic Feeding Mechanism for Small Scale Poultry Farm.
• 42
  Published paper in International Journal of Engineering Trends and Technology, ISSN: 2231-5381, NCAMES-2016 with paper entitled CFD Simulation of Centrifugal Blower Using ANSYS CFX.
• 43
  Published paper in International Journal of Engineering Trends and Technology, ISSN: 2231-5381,NCAMES-2016 with paper entitled Review on Experimental Analysis of Pulse Detonation Engine and Its Merits.
• 44
  Published paper in International Journal of Engineering Research and Technology (IJERT), Volume 3, Issue 17,NCERAME-2015 with paper entitled Effect of Oxygenated Fuel on Performance & Emission Characteristics of Diesel Engine.
• 45
  Published paper in International Journal of Research in Engineering and Science (IJRES), Volume 3, Issue 2,Feb-2015 with paper entitled Experimental Evaluation of effect of filler on tensile behavior of E- glass/epoxy composites

International Journals:

• 1
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its suitability as an Alternate Fuel for CI Engine” in Asian Journal of Engineering and Technology 2015, ISSN:2321-2462, Vol 3: pp. 467- 479.
• 2
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its suitability as an Alternate Fuel for CI Engine”, in“a2nd International Conference on Emerging Trends in Technology & Applied Sciences” at SAINTGITS COLLEGE OF ENGINEERING, Kottaym, Kerala, India on 2nd May 2015.
• 3
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Characterization and Performance studies of cotton seed and Simarouba oil blend on a four stroke single cylinder diesel engine”, in “ A National Conference on Green Energy: Potentials &Applications” at VCET, Puttur, D.K, India on 14thMay 2016.

After Joining SIT

• 1
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal published the research paper entitled “Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its suitability as an Alternate Fuel for CI Engine” in Asian Journal of Engineering and Technology 2015, ISSN:2321-2462, Vol 3: 467- 479.
• 2
  Jagadeesh B, Vidyasagar shetty, Raghavendra Pai K published the research paper entitled “Numerical Simulation and Experimental Validation of Air-Assisted Atomization for Aviation Applications” in International Journal of Emerging Research in Management and Technology 2017, ISSN:2278-9359, Vol 6: Issue-9
• 3
  Jagadeesh B, Abubakar Siddiq S, Mainuddin A, Mohammed Farhaan Shaikh and Abdul Falah B published the research paper entitled “preliminary design of aircraft shock Absorber” in International Journal of Technologies and Innovative research , May 2018, ISSN:2349 - 5162, Vol 5: Issue-5.
• 4
  Jagadeesh B, Abubakar Siddiq S, Mainuddin A, Mohammed Farhaan Shaikh and Abdul Falah B published the research paper entitled “preliminary design of aircraft Landing gear strut ” in International Journal of Innovative research in technology , May 2018, ISSN:2349 - 6002, Vol 4: Issue-12.
• 5
  Praveen babu, Swathi P Shetty, Kavya G Achar, Steve Johnson Lobo, Jagadeessh B “Research on Combination of Swing Wing with Canard and Tail used in Fighter Aircraft”, in International Journal of Recent Technology and Engineering (IJRTE)” ISSN: 2277-3878, Volume-8, Issue-2S3, July 2019
• 6
  Dr.Shrinivasa Mayya.D, Lokesh K S, Jagadeesh B “Demonstration of Collective and Cyclic Pitch Control of Helicopter”, in InternationalJournal of Engineering and Information Systems (IJEAIS)” ISSN: 2643-640X, Vol. 3 Issue 12, December –2019, Pages: 28-30
• 7
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Engine performance and emission studies with Cotton seed-Simarouba and Cotton seed-Mahua oil blends as a prtial Replacement Bio-fuel”, ‘Advances in IC Engines and Combustion Technology’ proceedings of NCICEC 2019, springer.com

National conferences

• 1
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Characterization and Performance studies of cotton seed and Simarouba oil blend on a four stroke single cylinder diesel engine”, in “ A National Conference on Green Energy: Potentials &Applications” at VCET, Puttur, D.K, India on 14thMay 2016.
• 2
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Performance and Emission Characteristics of Cotton seed and Simarouba oil bend on a Single Cylinder Four Stroke CI Engine”, in “ A National Conference on Advances in Mechanical Engineering Sciences” at SIT, Mangalore, D.K, India on 7thMay 2016.
• 3
  Jagadeesh B, Vishishta Mishra, Yashash M S and G Amuruth Kumar “An Fabrication of Helicopter Swashplate to demonstrate Collective and cyclic pitch control”, in National Conference on Recent Trends and Innovations in Mechanical Engineering and Technology” at Cambridge Institute of Technology, Bangalore, India on 3rd and 4th May 2019.
• 4
  Jagadeesh Bantwal, Lokesh K S, Vishnu, Aakash, Antony and Deekshith T S “Thermal Degradation Study on Fibres Binded with Thermoset Plastic used in Aerospace Industry”, in National Conference on Recent Trends and Innovations in Mechanical Engineering and Technology” at Cambridge Institute of Technology, Bangalore, India on 3rd and 4th May 2019.
• 5
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Engine performance and emission studies with Cotton seed-Simarouba and Cotton seed-Mahua oil blends as a prtial Replacement Bio-fuel”, in National Conference on Internal Combustion Engines and Combustion” at National Institute of Technology Kurukshetra, India on 1st and 4th November 2019.

Inter National conferences

• 1
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its suitability as an Alternate Fuel for CI Engine”, in“a2nd International Conference on Emerging Trends in Technology & Applied Sciences” at SAINTGITS CLLEGE OF ENGINEERING, Kottaym, Kerala, India on 2nd May 2015.
• 2
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “Investigations on Engine performance and emission with CSS and CSM oil blends as a Partial replacement Bio – fuel”, in “a International conference on Design and Advances in Mechanical Engineering” at SKP Engineering college, Tiruvannamalai, Tamil nadu, on 2nd February 2017.
• 3
  Dr. Ramakrishna N. Hegde and Jagadeesh Bantwal “An Experimental Study Based Comparison of Engine Performance Characteristics Using Natural Seed and Animal Fat Based Bio-Fuels”, in International Conference on Recent Advancement in Engineering and Technology” at LBS College Of Engineering, Kasargod, Kerala, India on 18th and 19th December 2018.
• 4
  Praveen babu, Swathi P Shetty, Kavya G Achar, Steve JohnsonLobo and Jagadeesh Bantwal “Analysis of Combination of Wing with Canard and Tail used in Fighter Aircraft”, in 1st International Conference on Emerging Trends in Engineering, Science and Management” at Rao Bahadur Y Mahabaleshwarappa Enginnering College, Ballari, Karnataka, India on 4th and 5th April 2019.

International Journals:

• 1
  Published a research paper on “Design and Fabrication of Modified Gear Train System - A Semi-automatic Hybrid Engine”, in the e-Journal International Journal of Innovative Research in Technology, Vol. 4, Issue 12, May 2018.
• 2
  Published a research paper on “Voice Assisted Dashboard System”, in the e-Journal International Journal for Research in Engineering Application & Management, Vol. 4, Issue 12, March 2019.
• 3
  Attended the National Conference on “Research in Higher Education, Learning and Administration”, Srinivas University, June 2019.

International Journals:

• 1
  Deepak Raj P. Y and Subodh H. M “Design, Analysis and Testing of Wing spar for Optimum Weight” in IJRSI, ISSN: 2321 – 2705, Vol. 4 – Issue VII: pp. 104 – 112, July – 2017.
• 2
  Deepak Raj P. Y and Sandeep Duvani “Design, Fabrication and Aerodynamic Analysis of a modified Archimedes Wind turbine” in IJRSI, ISSN: 2321 – 2705, Vol. 4 – Issue VS: pp. 55 -59, May – 2017.
• 3
  Deepak Raj P. Y and Rajashekarareddy H. G “Experimental and Computational study of Incompressible flow over a NACA 642-215 airfoil” in “National Conference on Advanced Mechanical Engineering and Sciences”, pp. 137 -138 at SIT, Mangalore, D.K, India on 7th May 2016.
• 4
  Deepak Raj P. Y and Devaraj K “Numerical Heat Transfer Analysis of a Flat Plate using Combined Jet Impingement and Film cooling with Flow Patterns” in International Journal of Engineering Research and Technology, ISSN: 2278 – 0181, Vol. 2 – Issue 11: pp. 2078 – 2086, Nov- 2013.

International Journals:

• 1
  Chethan I C " Aircraft fire protection system for class a fire " is published in International Journal of Emerging Technologies and Innovative Research, ISSN:2349-5162, Vol.6, Issue 5, May-2019.
• 2
  Chethan I C " Total takeoff weight estimation on Nose Wheel landing gear " is published in International Journal of Emerging Technologies and Innovative Research, ISSN:2349-5162, Vol.5, Issue 6, page no.1031-1035, June-2018.
• 3
  Chethan I C " Experimental Investigation of Mechanical Properties of Al6061 Hybrid Reinforced with Mica Powder and Silicon Carbide ", is published in International Journal of Emerging Technologies and Innovative Research with ISSN:2349-5162, Vol.5, Issue 5, page no.1258-1263, May-2018.
• 4
  Chethan I C “Determination Of Compressive Strength Of Graphene Reinforced With Aluminium-7075 Metal Matrix Composites”, is published in International Journal of Mechanical Engineering & Technology (Scopus Indexed Journal), Volume 9, Issue 1, January 2018, pp. 327–335; ISSN Print: 0976-6340 and ISSN Online: 0976-6359; Journal Impact Factor: 9.2286 Thomson Reuters' Researcher ID: B-7384-2016.
• 5
  Chethan I C "Fatigue Crack Growth Analysis of a Wing Stiffened Panel", is published in International Journal of Current Trends in Science and Technology with Online ISSN: 0976-9730, Print ISSN: 0976- 9498, DOI: http://currentsciences.info/10.15520/ctst.v8i01.239.pdf
• 6
  Chethan I C " Influence of Graphene on Hardness Number of Aluminium-7075 Based Metal Matrix Composites", is published in International Journal of Innovative Science and Research Technology with ISSN No:-2456 –2165.
• 7
  Chethan I C, “Fatigue Crack Growth Analysis of a Wing Stiffened Panel”, is presented in the International Conference on Innovations and Emerging Trends in Mechanical Engineering, Re: Paper ID - IIETME2014/NCET/D – 8

International Journals:

• 1
  Pavana K. “Aerodynamic Performance of A Ducted Propeller” in International Conference on Emerging Research in Management and Technology and published in the International Journal of Emerging Research in Management & Technology (IJERMT), ISSN: 2278-9359,Vol. 6 – Issue 5, May 2017.

International Journals:

• 1
  Avinash H S “POWER generation by utilizing repulsions of permanent magnets for small scale applications” in IJRET Volume-06 Issue-09.
• 2
  Avinash H S “Design and Fabrication of Improved Cyclone Separator to Control the Dust in Rice Mills” in IJIRSET, Volume 6, Issue 9, September 2017
• 3
  Avinash H S “Tribological behavior of PTFE composites-A review” in IJARAR approved by UGC, volume 5, issue 4, October-december,2018
• 4
  Avinash H S “Limited slip differential with electromagnetic clutch” in IJRAR approved by UGC, volume 6, issue 1, march 2019
• 5
  Avinash H S “Evolution of properties of alluminium-allumina-boron carbide MMC” in IJERT, special issue 2019, NCMPC -2019 conference proceedings.